ViewSonic M1 Pro - Page 37

37
Menu Opon Descripon
Color Temp
Select the color temperature seng.
• 6500K: Maintains normal white coloring.
• 7500K: A higher, cooler color temperature than 6500K.
• 9300K: The highest color temperature; makes the
image appear the most bluish-white.
• User Color: Adjust red, green, and blue values as
desired.
• Wall Color - Pink
• Wall Color - Yellow
• Wall Color - Blue
NOTE: The Wall Color feature can help correct the
projected picture’s colors to prevent possible
color dierence between the source and
projected pictures if you are projecng onto a
colored surface such as a painted wall which
may not be white.
Tint
The higher the value, the more greenish the picture
becomes. The lower the value, the more reddish the
picture becomes.
Saturaon
Refers to the amount of that color in a video picture.
Lower sengs produce less saturated colors; in fact,
a seng of “0” removes that color from the image
enrely. If the saturaon is too high, that color will be
overpowering and unrealisc.
Sharpness
A high value results in a sharper picture; a low value
soens the picture.
Gamma
Reects the relaonship between input source and
picture brightness.
Light Source Level
Select the suitable power consumpon of the LED.
Mode Power Consumpon
Full 100%
Eco 70%
Baery Saving 30%
Test Paern Test the color presentaon of the projector.