ViewSonic N4285p - Rear View of the Product

15
ENGLISH
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic N4285p/N4785p
Getting Started
Rear and Side View of the Product
Item Description
1 Power (AC input)
Plug-in the supplied AC Power cord and connect to the AC
input power source.
2
Service (USB Terminal)
This port is only for rmware upgrade.
3
HDMI 1 Input Terminal
Connect this port to the HDMI output of A/V device.
4
HDMI 2 Input Terminal
Connect this port to the HDMI output of A/V device.
5
RS232 signal input
This port is for the service technician’s use.
6
VGA signal input
Connect a 15-pin D-sub RGB cable to the RGB output of your
computer and the other end to the RGB input on the rear of the
LCD TV.
7
YPbPr 2 signal input
Connect this port to the YPbPr output of A/V device.
8
YPbPr 1 signal input
Connect this port to the YPbPr output of A/V device.
9
Composite Video input
Connect this jack to the composite video output connectors on
your A/V equipment.
10
S-Video input
Connect the S-Video cable from the compatible device to this
connector on the rear panel of the LCD TV.
11
Air/Cable input jack
Connect the coaxial (RF) connector from Antenna/ Cable/
Digital cable.