ViewSonic P220f User Manual

Control Explanation (Continued)
ViewSonic P220f 11
V. Linear (Vertical Linearity Center) adjusts the vertical
distortion at the center of the screen image.
NOTE: Vertical Linearity Center is an advanced control and
should be used for setup and calibration only.
V. Linear Sym (Vertical Linearity Symmetry) minimizes the
distortion (squeezing or stretching) images between the top
and bottom of the screen image.
NOTE: Vertical Linearity Symmetry is an advanced control
and should be used for setup and calibration only.
Top Hooking straightens the top corners of the screen
image.
Bottom Hooking straightens the bottom corners of the
screen image.
Purity adjusts the uneven color of the overall image. For
example, if one area of a color appears darker than another
area, first use the degauss feature. If color is still uneven,
use the purity control.
Top Left (Purity) adjusts uneven color at top left corner of
screen.
Top Right (Purity) adjusts uneven color at top right corner
of screen.
Bottom Left (Purity) adjusts uneven color at bottom left
corner of screen.
Bottom Right (Purity) adjusts uneven color at bottom right
corner of screen.
Data Recall returns adjustments to the original factory
settings if the product is operating in a Preset Timing Modes
(see the table at the bottom of page 11).
Exception: This control does not affect changes made with
the User Color control.

ViewSonic P220f Specifications

General

Type	22\
Pixel pitch	0.24 mm
Display diagonal	22 \
Vertical scan range	50 - 160 Hz
Horizontal scan range	30 - 110 kHz
Viewable size, vertical	300 mm
Viewable size, horizontal	400 mm
Audio system	No
Video in	Bandwidth - 266MHz (typical)
I/O ports	Signal - High-density 15 pin mini D-sub Power - 3-pin plug (IEC 320)
Mounting interface	Plug & Play
Maximum resolution	2048 x 1536 pixels
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Certification	TCO'03, TÜV/GS, TÜV/ERGO, ISO9241-3, ISO9241-7, ISO9241-8, Energy 2000, MPR-II, CE, CB, FCC-B, UL, CSA, DHHS, DOC-B, NEMKO, DEMKO, SEMKO, FIMKO, B-Mark, PCT, SASO, CCIB, C-Tick, S-Mark, NOM, VCCI, IRAM, ICE5003, CCEE, EMC, EMI-B
Power source	AC 100-240V, 50/60 Hz (auto switch)
Power management	Energy Star, VESA DPMS, TCO'03 Energy 2000
Power consumption (typical)	125 W
Mac compatibility	Yes
Compatible products	PC compatible from VGA up to 2048 x 1536. Power Mac compatible from 640 x 480 to 2048 x 1536. Other - Most workstations

Weight and Dimensions

Weight	31000 g
Dimensions (WxDxH)	500 x 511.5 x 505 mm