19ViewSonic PJ358
Operating
Temporarily blanking the screen
1.
Press the BLANK button on the remote control.
The blank screen will be displayed instead of the screen of
input signal. Please refer to the BLANK item in the SCREEN
menu
.
To exit from the blank screen and return to the input signal
screen, press the BLANK button again.
● The projector automatically returns to the input signal screen
when one of the projector’s buttons or the remote control buttons
(except ASPECT, POSITION or FREEZE button, also except
MY BUTTON1/2 if AUTO KEYSTONE or MyMemory or PICTURE MODE is
assigned on these buttons) is pressed.
NOTE • The sound is not connected with the blank screen function. If
necessary, set the volume or mute rst.
Freezing the screen
1.
Press the FREEZE button on the remote control.
The “FREEZE” indication will appear on the screen, and the
projector will go into the FREEZE mode.
To exit the FREEZE mode and restore the screen to normal,
press the FREEZE button again.
● The projector automatically exits from the FREEZE mode
when one of the projector’s buttons or remote control buttons
of STANDBY/ON, SEARCH, COMPUTER/STORAGE, VIDEO,
BLANK, AUTO, VOLUME, MUTE, KEYSTONE, MENU,
MAGNIFY and MY BUTTON1/2(except MyMemory or PICTURE MODE is
assigned to) is pressed.
● If the projector continues projecting a still image for a long time, the LCD panel
might possibly be burned in. Do not leave the projector in the FREEZE mode
for too long.
To Next Page
Loading...
