ViewSonic PJ402D - Advanced Settings; Source Select, ECO Mode, Color Space

31ViewSonic PJ402D
Advanced
Option Actions/Descriptions
Auto Source Automatically scans the input source.
Press the MENU\ENTER button on the Projector Control Panel or
the Enter button on the Remote Control to active this function.
Rear The image is reversed horizontally.
Press the MENU\ENTER button on the Projector Control Panel or
the Enter button on the Remote Control to active this function.
Ceiling The image is inverted vertically.
Press the MENU\ENTER button on the Projector Control Panel or
the Enter button on the Remote Control to active this function.
ECO Mode Uses this function to dim the projector lamp light output
which will lower power consumption and increase lamp life.
Select the desired setting with the

/

buttons:
ON
OFF
Lamp Hours Displays operating hours since lamp timer reset. Lamp hour
counter is displayed in read-only format, and this setting
cannot be manually adjusted.
Color Space Manually selects signal type.
Select the input signal type with the

/

buttons:
RGB
YCbCr
YPbPr
Select