13ViewSonic PJ406D
Adjusting the Projected Image
Adjusting the Projector Image Height
The projector is equipped with an elevator foot for adjusting the
image height.
To raise the image:
1. Press the elevator button
.
2. Raise the image to the desired height angle
, then release
the button to lock the elevator foot into position.
3. Use
to fi ne-tune the display angle.
To lower the image:
1. Press the elevator button.
2. Lower the image, then release the button to lock the eleva-
tor foot into position.
3. Use
to fi ne-tune the display angle.
Elevator Foot
Elevator Button
1
2
3
3
To Next Page
Loading...
