ViewSonic PJ406D - Lamp Setting

25ViewSonic PJ406D
Projection Hours
Display the projection time.
Lamp Hours
Display the cumulative lamp operating time.
Lamp Reset
Reset the lamp life hour after replacing a new lamp.
Lamp Reminding
Choose this function to show or to hide the warning message when
the changing lamp message is displayed. The message will show up
30 hours before end of life.
Whisper Mode
Choose “On” to dim the projector lamp which will lower power
consumption and extend the lamp life by up to 130%. Choose ”Off”
to return to normal mode.
Auto Power Off
Sets the interval of power-off of the system, if there is no signal
input. (In minutes)
Sleep Timer
Sets the interval of power-off of the system, if there is no signal
input. (In minutes)
Lamp Setting