Step Figure Description
1
Press the power button to
shutdown the projector and
disconnect the power cord.
If the lamp is hot, please do not
start any procedure until the
projector lamp cools down.
Flip the projector and remove
the lens cover.
2
1. Flip the projector on the table.
2. Remove the screws
J1635-A010-0A*8 on the Bottom
cover as shown.
3
Rotate the Focus Ring by
forward sequence to take it off
from the unit.
J1635-A010-0A*8
Confidential - Do Not Copy
ViewSonic Corporation
Pro8400
To Next Page
Loading...
