ViewSonic Pro8400 Series VS13647 - Disassembly Steps: Lens Removal

Step Figure Description
21
1. Loosen the four screws on
the Lens.
2. Remove the Lens carefully.
3.3 Assembly FAN Module
Step Figure
Description
1
Assemble Fan1(J2394-0143-01) and
Fan2 (J2394-0144-00 ):
1. Paste the Fan Pad (P4E38-1070-00)
on the middle of it.
2. Paste the Fan Sponge*4
(P4G38-1180-00) on the top and
bottom of it as picture shown.
P0335-7010-01*4
Fan Pad
Fan1 Fan2
Fan Sponge*4
Confidential - Do Not Copy
ViewSonic Corporation
Pro8400
23