ViewSonic Pro9000 - OPTIONS | Password

35
OPTIONS | Password
Security
`
On: Choose “On” to use security verication when turning on the projector.
`
Off: Choose “Off” to be able to switch on the projector without password
verication.
Change Password
`
First time:
y
Set Security to On, then enter your new
password using the number buttons on
the remote control and press “Enter” to
conrm it.
 The password has to be 4~8 digits.
y
Enter the new password again and press “Enter” to conrm it. If both
"New Password" and "Conrm Password" match, a "Password setting is
completed" message appears on the screen.
`
Change Password:
y
Select Change Password and press “Enter” to enter the submenu.
y
Enter a new password using the number buttons on the remote control, then
press “Enter” to conrm it.
y
Enter the new password again and press “Enter” to conrm it.
`
If the incorrect password is entered for 3 times, the projector will automatically
shut down.
`
If you have forgotten your password, please contact your local ofce for support.
Default User1 User2
Over
Scan
Magnify Lock
RGB
CMY
Color
Temp
Gamma
Freeze Blank Pattern
Color
mode
Sleep
Timer
Memory
1 2 3
4 5 6
7 8 9
0