ViewSonic Pro9510L - Resetting the Lamp Time

58
Resetting the Lamp Time
After replacing the lamp, you should reset the lamp hour counter to zero. Refer to the following:
2.
Press the MENU button to open
the OSD menu.
3.
Press the cursor ◄► button to
move to the Advanced menu.
Press the cursor button to move
down to Advanced.
4.
Press the cursor ▼▲ button to
move down to Lamp Hour Reset.
5.
Press the cursor (Enter) / ►
button.
A message screen appears.
6.
Press ▼▲◄► buttons to reset
the lamp hour.
7.
Press the MENU button to get
back to Advanced.