APPENDIX II
RS-232C Protocol
RS232 Setting
Minimum delay for next command: 1ms
Control Command Structure
The command is structured by the Header code, command code, data code and end
code. Most of the commands are structured except some for the compatibility issue
with other projectors.
Operation Command
Note:
"CR" mean Carriage Return
XX=99
Ex: S99S001 + enter , To power on.
Return Result P=Pass / F=Fail
n: 0:Disable/1: Enable/Value(0~9999)
53h Xh Xh 53h 30h 30h 30h 31h 0Dh
53h Xh Xh 53h 30h 30h 30h 32h 0Dh
53h Xh Xh 53h 30h 30h 30h 33h 0Dh
53h Xh Xh 47h 30h 30h 30h 34h 0Dh
53h Xh Xh 47h 30h 30h 30h 35h 0Dh
53h Xh Xh 53h 30h 30h 30h 36h 0Dh
53h Xh Xh 47h 30h 30h 30h 37h 0Dh
0: Reset
1:Standby
2:Operation
3:Cooling
53h Xh Xh 47h 30h 30h 30h 38h 0Dh
53h Xh Xh 47h 30h 30h 30h 39h 0Dh
53h Xh Xh 53h 30h 30h 30h 39h nh 0Dh
53h Xh Xh 53h 30h 30h 31h 30h 0Dh