ViewSonic PX727HD - Selecting an Input Source



The projector can be connected to multiple devices at the same time. However, it
can only display one full screen at a time.
If you want the projector to automatically search for the input source, ensure the
 function in the  menu is .
The  can also be manually selected by pressing one of the source
selection buttons on the remote control, or by cycling through the available input
sources.
On Of f
HDMI 1 HDMI 2COMP
Source
Pattern
Brightness
Contrast
Aspect
Color
Temp
Eco
Mode
StandardGaming Sports
Movie User
Blank
3D
Auto
Sync
ID Set 1 2
3 4 5
6 7 8
To manually select the input source do the following:
Press , and a source selecon menu will appear.
Press  unl your desired signal is selected and press .
Once detected, the selected source informaon will be displayed on the screen
for a few seconds.
  If there are mulple devices connected to the projector, repeat steps 1-2 to
search for another source.