Keystoning refers to the situation where the projected image becomes a trapezoid
due to angled projection.
To correct this, besides adjusting the height of the projector, you may also:
Use the keystone keys on the projector or remote control to display the keystone
page.
Aer the keystone page is displayed, press to correct keystoning at the top of
the image. Press to correct keystoning at the boom of the image. Press
to correct keystoning at the boom of the image. Press to correct keystoning
at the right side of the image. Press to correct keystoning at the le side of the
image.
On Of f
HDMI 1 HDMI 2COMP
Source
Pattern
Brightness
Contrast
Aspect
Colo r
Temp
Eco
Mode
StandardGaming Sports
Movie User
Blank
3D
Aut o
Sync
ID Set 1 2
3 4 5
6 7 8
EXIT
MENU
SOURCE
BLANK
MODE
COLOR
To Next Page
Loading...
