This section will introduce the On-Screen Display (OSD) Menu and its options.
The OSD screenshots in this manual are for reference only and may dier from
the actual design. Some of the following OSD sengs may not be available.
Please refer to the actual OSD of your projector.
The projector is equipped with an On-Screen Display (OSD) Menu for making
various adjustments. It can be accessed by pressing on the projector or
remote control.
Press to select a main menu. Then press or use to access the
sub-menu list.
Press to select the menu opon. Then press to display its sub-menu,
or press to adjust/select the seng.
Some sub-menu opons may have another sub-menu. To enter the respecve
sub-menu, press . Use or to adjust/select the seng.
To Next Page
Loading...
