The projector’s lamp information and settings can be viewed and adjusted
by viewing the “Lamp Hours Information” or adjusting the “Lamp Mode”.
A Color Mode appropriate for playing colorful movies, video clips
from digital cameras, or DVs through the PC input. Best for a low light
environment.
Refers to a cropped image on your monitor’s screen. A setting on your
monitor zooms in on movie content, so that you cannot see the outermost
edges of the film.
Projects a grid to be used for image adjustment and fine-tuning.
The projected image can be adjusted based on the installation location of
the projector, i.e. ceiling or rear projection installation.
A standard code for serial communication transmission of data, used for
connection to other devices or controller vis serial port or LAN port.
Adjusts the picture quality.
A Color Mode that is designed for normal viewing circumstances in a
daylight environment.
Manually adjust the size of the projected image.
To Next Page
Loading...
