ViewSonic TD2223 User Manual

16
USB Connecon
Connect one end of a USB cable to a USB port of the monitor. Then connect the
other end of the cable to a USB port of your computer.
NOTE: The monitor supports two (2) types of USB ports. When making the
connecon(s), observe the following guidelines:
• Two (2) USB Type A ports: Connecon for your Type A peripheral
device(s). (i.e. storage device).
 NOTE: To acvate the USB Type A port, ensure your computer is
also connected to the monitor’s USB Type B port.
• One (1) USB Type B port: Connect the USB Type B male cable (square
with 2 cut corners) to this port, and then connect the other end of the
cable to the USB downstream port of your computer.

ViewSonic TD2223 Specifications

General

Color	black
Screen Type	led
Tiltable	yes
Wall Mount	100mm x 100mm
Touch Screen	no
Webcam	no
OS Compatibility	windows
Screen Size	22 inches
Panel Type	tn
Aspect Ratio	16:9
Resolution	1920 x 1080
Native Resolution	1920 x 1080
Refresh Rate	75hz
Horizontal Viewing Angle	170 degrees
Vertical Viewing Angle	160 degrees
Response Time	5 milliseconds
Brightness	250 candela per square meter
Contrast Ratio	1000:1
Synchronization	vsync
Horizontal Scan Rate	82 kilohertz
HDR	no
Built-In Speakers	yes
HDMI Ports	1
VGA Ports	1
DVI	1
Headphones Output	yes
Voice Assistant	no
Power Saving Mode	0.5 watts
Power Consumption	19 watts
Depth with Stand	4 inches
Height with Stand	13 1/10 inches
Width with Stand	20 1/2 inches
Depth without Stand	2 2/5 inches
Height without Stand	12 1/2 inches
Net Weight without Stand	8.6 pounds