ViewSonic TD2223 User Manual

9
Inial Setup
This secon provides detailed instrucons for seng up your monitor.
Installing the Stand
1. Place the monitor on a at, stable surface with the screen facing down.
2. With one hand applying downward pressure on the monitor, carefully li and
extend the stand.
3. Li the device into its upright posion on a at, stable surface.
NOTE: Always place the device on a at, stable surface. Failure to do so may
cause the device to fall and damage the device and/or result in personal
injury.

ViewSonic TD2223 Specifications

General

Color	black
Screen Type	led
Tiltable	yes
Wall Mount	100mm x 100mm
Touch Screen	no
Webcam	no
OS Compatibility	windows
Screen Size	22 inches
Panel Type	tn
Aspect Ratio	16:9
Resolution	1920 x 1080
Native Resolution	1920 x 1080
Refresh Rate	75hz
Horizontal Viewing Angle	170 degrees
Vertical Viewing Angle	160 degrees
Response Time	5 milliseconds
Brightness	250 candela per square meter
Contrast Ratio	1000:1
Synchronization	vsync
Horizontal Scan Rate	82 kilohertz
HDR	no
Built-In Speakers	yes
HDMI Ports	1
VGA Ports	1
DVI	1
Headphones Output	yes
Voice Assistant	no
Power Saving Mode	0.5 watts
Power Consumption	19 watts
Depth with Stand	4 inches
Height with Stand	13 1/10 inches
Width with Stand	20 1/2 inches
Depth without Stand	2 2/5 inches
Height without Stand	12 1/2 inches
Net Weight without Stand	8.6 pounds