ViewSonic ViewBoard - Eraser and Selection Tools

17
Eraser Tool
Tap on the eraser tool to select it. You will then see three eraser options
appear above the tool.
Selection Tool
Tap on the selection tool. Then, trace around a drawing to select it. You can
then drag the drawing elsewhere on the screen or resize it. You can also use
the on-screen controls to delete or lock the drawing, or to adjust its
appearance (e.g., changing the line thickness, opacity, color, or orientation).
Select this & then drag
your finger along the
drawing to erase a
small area at a time.
Select this & then
trace around the
drawing to erase it at
once.
Select this to
automatically erase all
of the drawings on the
screen at once.