Connect one end of a USB cable to a USB port of the monitor. Then connect the other end of the cable
to a USB port of your computer.
USB Number Description
Type
A
Two (2)
Connection for your Type A
peripheral device(s). (e.g., storage
device).
NOTE: To use some peripherals,
please ensure your computer is
also connected to the monitor’s
USB Type B port.
Type
B
One (1)
Connect the USB Type B male
cable (square with 2 cut corners)
to this port, and then connect the
other end of the cable to the USB
downstream port of your
computer.
Type
C
One (1)
Make sure your Type C output
device and cable support video
signal transmission.
Height Adjustment
Swivel Adjustment
Tilt Angle Adjustment
Lower or raise the monitor to the desired height (0 to 130 mm).
NOTE: When adjusting, press down firmly along the adjustment track holding the monitor with both
hands on the side.
Swivel the monitor to the left or right for the desired viewing angle (60˚).
Tilt the monitor forwards or backwards to the desired viewing angle (-5˚ to 21˚).
Height Adjustment
Swivel Adjustment
Tilt Angle Adjustment
To Next Page
Loading...
