ViewSonic VS17612 - Connecting to Audio; Bluetooth Speaker

2323

Bluetooth Speaker
The projector is equipped with a Bluetooth speaker that allows the user to connect
their device wirelessly for audio playback.
To connect and pair your device:
1. Press the Power buon and select the Bluetooth menu, or press the Bluetooth
buon on the remote control.
2. When the dialog box below is displayed, select Yes to enter Bluetooth mode.
 The Bluetooth LED indicator will ash blue approximately one (1) me
per second.
3. Press and hold the Bluetooth buon for three (3) seconds on the remote control
to enter pairing mode. Ensure your device’s Bluetooth is also acvated.
 The Bluetooth LED indicator will ash blue approximately two (2) mes
per second once in pairing mode. A sound eect will also be audible.
4. Upon successful connecon, another sound eect will be audible in addion to
the Bluetooth LED indicator maintaining a solid blue light.
Once paired, if both the projector and your device are powered on they will
automacally connect via Bluetooth. When connected please note:
• Only the Power and Return buons can exit Bluetooth mode.
• If a 3.5 mm audio cable is plugged into the Audio In socket, the audio signal
will switch to line in automacally.