ViewSonic VS18324 User Manual

12
Inserng Remote Control Baeries
The remote control is powered by two 1.5v "AAA" baeries.
To insert baeries into the remote control:
1. Remove the cover on the rear of the remote control.
2. Insert two “AAA” baeries, ensuring the “+” symbol on the baery matches the
“+” on the baery post.
3. Replace the cover by aligning it with the slot on the remote control and snapping
the latch shut.
WARNING: There is a risk of explosion if baeries are installed with incorrect
polarity.
NOTE:
• It is recommended that you do not mix battery types.
• Avoid exposure to heat or steam.
• Do not allow water or other liquids to splash on the remote control. If the
remote control becomes wet, wipe it dry immediately.
• Always dispose of old batteries in an environmentally friendly way. Contact
your local government for more information on how to dispose of batteries
safely.
Locking the Remote Control
When the administrator does not want others to control the remote control, it
can be locked by pressing 1169+OK on the remote control.

ViewSonic VS18324 Specifications

General

Brand	ViewSonic
Model	VS18324
Category	Monitor
Language	English