How to troubleshoot no power on ViewSonic VSD243 Monitor?
If your ViewSonic monitor has no power: - Ensure that the power adaptor is plugged into the correct electrical outlet. - Ensure that the DC connector is fully inserted into the correct socket on the rear of the VSD243 located under the cover. - Check the power outlet with another device (i.e. table lamp).
General| Aspect ratio | 16:9 |
|---|---|
| Screen shape | Flat |
| Response time | 16 ms |
| Display diagonal | 23.6 \ |
| Touch technology | Multi-touch |
| Touchscreen type | Kiosk |
| Display brightness | 250 cd/m² |
| Display technology | LED |
| Touchscreen technology | Capacitive |
| Contrast ratio (typical) | 3000:1 |
| Number of simultaneous touchpoints | 10 |
| Certification | cTUVus, FCC-B, FCC-ID, CA IC |
| Product color | Black |
| Product design | Interactive flat panel |
| AC input voltage | 100 - 240 V |
| Power consumption (max) | 40 W |
| Power consumption (off) | 0.5 W |
| Power consumption (standby) | 2 W |
| Power consumption (typical) | 16 W |
| Operating temperature (T-T) | 0 - 35 °C |
| Operating relative humidity (H-H) | 20 - 90 % |
| Package depth | 140 mm |
| Package width | 643 mm |
| Package height | 435 mm |
| Package weight | 7600 g |
| HDMI version | 1.4 |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac) |
| Headphone outputs | 1 |
| USB upstream port type | USB Type-B |
| Compatible memory cards | SD |
| USB Type-A downstream ports quantity | 4 |
| Bluetooth version | 4.0 |
| Internal memory type | DDR3 |
| Depth (without stand) | 47 mm |
| Height (without stand) | 351.8 mm |
| Weight (without stand) | 5600 g |
| eMMC capacity | 16 GB |
| Internal memory | 2048 MB |
| RMS rated power | 5 W |
| Purpose | Universal |
| NVIDIA G-SYNC | No |
| Operating system version | 8.1 |
| Operating system installed | Android |
| Harmonized System (HS) code | 85285210 |
Weight and Dimensions| Width (without stand) | 572.9 mm |
|---|
To Next Page
