ViewZ VZ-19CMP User Manual

12 User ManualVisit the ViewZ USA website at https://www.viewzusa.com
CONTROL AND FUNCTION
Picture
▲/▼ MOVE ◄/► SELECT(ADJUST) MENU RETURN
1) Only available in AV(CVBS) input
2) Only available in AV(CVBS) & HDMI input
BRIGHTNESS
USER
16 : 9
WARM
NOISE REDUCTION
1)
CONTRAST
TINT
1)
DYNAMIC
4 : 3
NORMAL
COLOR
STANDARD
ASPECT RATIO
Adjust the brightness
Apply user selected values - brightness, contrast, color and hue
Set the image size to 16 : 9
Give the white color a reddish tint
Reduce noise of the display image LOW / MID / HIGH / DEFAULT / OFF
Adjust the contrast
Adjust the tint
Provide enhanced contrast and sharpness
Set the image size to 4 : 3
Give the white color a neutral tint
Adjust the color saturation
Provide standard contrast and sharpness
Adjust the video format
0 ~ 100
0 ~ 100
0 ~ 100
0 ~ 100
See table below
SHARPNESS
2)
MILD
COOL
USER
1)
PICTURE MODE
NOISE REDUCTION
COLOR TEMP
Adjust the sharpness
Reduce contrast and sharpness
Give the white color a blue-ish tint
Set custom color temperature
Adjust the image color setting
Adjust the noise reduction value
Adjust the color setting
0 ~ 100
See table below
See table below
See table below
FUNCTION
PICTURE MODE
ASPECT RATIO
COLOR TEMP.
FUNCTION VALUE
VALUE
1) To set custom color temperature (R,G,B values), select "USER" to set color temperature. Keep pushing 'Down' buon on the monitor or the
remote controller, then you will see Red, Green and Blue opon
1) Only available in AV(CVBS) & HDMI input

ViewZ VZ-19CMP Specifications

General

Brand	ViewZ
Model	VZ-19CMP
Category	Monitor
Language	English