ViewZ VZ-19CMP - OSD Control and Function

11User Manual Visit the ViewZ USA website at https://www.viewzusa.com
CONTROL AND FUNCTION
Volume
Detect Source Signal Message
Select Input Source
Press◄ / ► buons to adjust volume on monitor
Press◄ / ► buons to adjust volume on remote controller
Press 'SOURCE' buon on monitor or 'INPUT' buon on remote controller
Press ▲ / ▼ buon to change input source and then press ► buon to select input source on monitor
Press ▲ / ▼ buon to change input source and then press 'INPUT' / ► buons to select input source on remote controller
If you connect any input source, monitor will display current input source resoluon and frequency.
Input Source
PC-RGB
HDMI
CVBS