ViewZ VZ-19CMP - Mounting Guide

16 User ManualVisit the ViewZ USA website at https://www.viewzusa.com
MOUNTING GUIDE
Wall Mounting (Optional)
VZ-CMP monitors are suitable for VESA wall mount (not included in the delivery).
1. VZ-19CMP, VZ-22CMP, VZ-24CMP : VESA WALL MOUNT 100mm x 100mm
Aenon!
VZ-CMX : You must use 4 * M4 x L8 screws to assemble this monitor and the wall mount bracket.
Mounng Safety !
At least two people are recommended to safely install the mount.
WARNING !
If user uses screws longer than M4 x L8 mm, it may cause damage to the unit.
Please use bolt of correct size and length as instructed.
M4 x L8 screws