ViewZ VZ-43UHD - Monitor Button Function

12 User ManualVisit the ViewZ USA website at https://www.viewzusa.com
1. Source
Select an input source
2. Up & Down ▲ ▼
Switch a menu on OSD
3. Le & Right - (VOL) +
Change the value on selected menu or
+ (hot key) set the volume
- (hot key) set the backlight
On Monitor, Button Control
Monitor Button Function
4. Menu
Enter or exit the OSD / Select a menu on OSD
5. Power
Monitor power on / o
CONTROL AND FUNCTION
q
w
e
r
t
All picture, sound sengs and setup can be adjusted in OSD (On Screen Display) menu.
To adjust the OSD screen:
1. Press the MENU buon to enter the OSD MENU
2. Press the SOURCE buon, then press the ▲ / ▼ buons to select input source
Press the SOURCE buon to select a desired input source
3. Press the + / – buons to select the desired main MENU. The selected main MENU is highlighted
4. Press the ▲ / ▼ buons to select the desired sub MENU. The selected sub MENU is highlighted
5. Change the value you wish to adjust by using the + / – buons
6. Press the MENU buon to conrm the adjustment on sub MENU
7. Press the MENU buon to exit the sub MENU and go back to the main MENU
8. Press the MENU buon to exit the OSD MENU