ViewZ VZ-43UHD - Stand Installation

9User Manual Visit the ViewZ USA website at https://www.viewzusa.com
1. Slot each stand into boom holes of VZ-43&55UHD as shown.
2. Align the holes between stand and VZ-43&55UHD.
3. Tighten provided screws (M6 x L40mm) into the holes.
Stand Installation
STAND INSTALLATION
Aenon!
VZ-43& 55UHD : You must use 4 * M6 x L40 mm screws to assemble this monitor and the stand.
Mounng Safety !
At least two people are recommended to install the mount.
WARNING !
If the user uses longer screws than M6 x L40 mm, it may damage the unit.
M6 screws