Transferring Data
You can transfer data to your PC via the supplied mini USB cable.
Using the USB Cable
To use the mini USB cable, start by removing the battery door. Insert the USB cable, making sure the
battery wedge remains in place (Fig. 56). Be sure to use the cable supplied with your Pb200i.
Connect the USB cable to the PC. The driver will install automatically. You may also get a message on
your Pb200i that reads “Allow USB debugging?” the first time you connect to your PC (Fig. 57). Select
“Always allow from this computer” and then select “OK.” When connecting the Pb200i to a PC, it will
appear as though you’ve plugged in an external drive (Fig. 58). Select internal storage, then select the
“Readings” folder (Fig. 55).
To Next Page
Loading...