Viken Detection Pb200i - Creating User and Supervisor Accounts

Page 32
Creating a User/Supervisor
Creating another User or Supervisor ID on the Pb200i lets you easily identify who was using the
instrument for an inspection, and/or restrict certain functions of the instrument on a user-by-user basis to
reduce potential for error, such as a User accidentally deleting stored readings.
To create a Supervisor ID on the Pb200i, start at the Main Menu. Select Setup>Users>Create User.
Select “Supervisor” and create a new password (Fig. 103 to 107).
Caution: Only an administrator can set up these rights.
(Figures 64 to 68)
Figure 103
Figure 104
Figure 105
Figure 106
Figure 107