Viken Detection Pb200i User Manual

Page 1
Pb200i User Guide
April, 2018
Software V3.2 or later
Before operating the Pb200i, be sure to read this entire User’s
Guide. We strongly recommend that you store this User’s Guide
with the instrument in its carrying case.
For Sales & Service Contact
2650 E. 40th Ave. • Denver, CO 80205
Phone 303-320-4764 • Fax 303-322-7242
1-800-833-7958
www.geotechenv.com

Viken Detection Pb200i Specifications

General

Brand	Viken Detection
Model	Pb200i
Category	Measuring Instruments
Language	English

Summary

Pb200i Hardware Overview

Charging the Batteries

Battery Installation Procedure

Powering On and Initializing the Pb Application

Instrument Startup and Application Access

Safety Warning Screen Acknowledgment

How to acknowledge safety warnings before proceeding.

Performing a Measurement

Initiating a Measurement

How to start a measurement using trigger and proximity.

Shutter and Indicator Behavior

Testing Accuracy and Precision of the Pb200i

Quality Control Procedures

Steps for verifying instrument accuracy and precision.

Reference Block and Result Evaluation

Using the reference block and evaluating measurement results.

Performing an Inspection with the Pb200i

Measurement Display and Result Interpretation

Interpreting Measurement Outcomes

Using the Internal Read Through Adapter (iRTA)

iRTA Operation and Measurement Impact

Using Data Entry Fields

Creating Jobs and Performing Calibration Checks

Job Management and Calibration Initiation

Setting up jobs and starting calibration checks.

Calibration Check Measurement Process

Performing readings on reference samples for calibration.

Calibration Check Results and Null Reading Handling

Retrieving and Exporting Data

Data Export Options and Formats

Transferring Data via USB Cable

Connecting and Authorizing USB Data Transfer

Steps for connecting the device and authorizing data transfer.

Using Wi-Fi for Data Transfer

Enabling Wi-Fi and Network Connection

Steps to activate Wi-Fi and connect to a wireless network.

FTP Server for Data Transfer

Setting Up and Enabling the FTP Server

Enabling Bluetooth™ Connectivity

Pairing Bluetooth Devices

Turning the GPS Receiver On/Off

Creating an Administrator Account

Initial Login and First User Setup

Changing User Credentials

Updating Passwords and User Names

Creating User and Supervisor Accounts

Modifying User Permissions

Changing the Action Level

Adjusting Action Level Mode Settings

How to change the Pb threshold in Action Level Mode.

Extended Reading Mode Options

Stop at Set Level Configuration

Setting custom thresholds for measurement termination.

Fixed Time Reading Mode

Setting a Fixed Reading Duration

Configuring a maximum measurement time.

Custom Exporting Options

Selecting Export Fields and Job IDs

Camera Operations

Capturing and Associating Photos

Test Screen Display Customization

Radiation Safety Precautions

Source and Shutter Safety Information

Information on the radioisotope source and safe shutter operation.

Minimizing Radiation Exposure

Guidelines for safe handling and maintaining distance.

Typical Radiation Dose Rates

Operating Conditions and General Safety

User Authorization, Handling, and Storage

Radiation Dosimetry

Leak Testing Procedures

Leak Test Requirements, Process, and Labs

Frequency, process, and approved labs for leak testing.

Leak Test Wipe Locations

Emergency Procedures

Lost, Stolen, or Damaged Instrument Protocols

Steps to follow for instrument loss or damage.

Emergency Contact Information

Essential Emergency Contact Numbers

Fields for critical contact details.