Viken Detection Pb200i - FTP Server for Data Transfer; Setting Up and Enabling the FTP Server

Page 24
Select and open the FTP Server app (Fig. 71). To enable the FTP server, select the icon and swipe
from off to on (Fig. 72).
Caution: The FTP server feature will default to the “off” position for security reasons every time
the instrument is turned on.
Place the number which appears in the area circled in Fig. 73 in your web browser. The example shown
here is ftp://10.1.10.13:2121/
Figure 71
Figure 72
Figure 73