Viken Detection Pb200i - Page 36

Page 36
When the action level is set to 1.0 mg/cm2, the instrument will display results as shown in Fig. 135 to 137.
When the action level is set to anything other than 1.0 mg/cm
2
, the instrument will display “NEG” (for
negative) and “POS” for positive. In this example, the action level has been set to .7 mg/cm2 (Fig. 99 to
101).
Figure 99 Figure 100 Figure 101
Figure 132
Figure 133
Figure 134
Figure 135
Figure 136
Figure 137
Figure 138
Figure 139
Figure 110