Viking Access Systems Q-7 - STANDARD FEATURES AND OPERATOR SPECIFICATIONS

VIKING ACCESS SYSTEMS
631 Wald Irvine, CA 92618
Phone 800.908.0884
Fax 949.753.1640
www.vikingaccess.com
STANDARD FEATURES
AND OPERATOR SPECIFICATIONS
INSTALLATION DATE: __________________________________
COMPANY / INSTALLER: ________________________________
CONTAC T: __________________________________________
SERIAL NUMBER(S): ____________________________________
ALL INSTALLATION, MAINTENANCE AND REPAIR WORK MUST BE
DOCUMENTED AND MADE AVAILABLE TO THE USER.
• UL Listed; UL325 and UL991
• ETL Listed; UL325 and UL991
• Elegant design, appealing to any
architectural project
• Plated and powder coated steel chassis
• Adjustable travel speed
• Up to 120’ maximum gate opening
• 100% duty cycle
• 100 cycles of operation on backup battery
(2000 lb. gate and 40’ length)
• Intelligent speed control with smooth start
and stop, self-adjust system
• Anti-Tailgate and Operation Pre-Warming
features
• On-Board LCD Display provides diagnostics,
operator status, settings and real-time volt
and amp readings
• Intelligent obstruction detection with
adjustable sensitivity
• Built-in climate control for cold weather
applications
• Built-in protection against lightning strikes
or similar electrical surges
• Regulated power supply for your external
accessories
• Inherent overload protection; redundancy
design using multiple types of protection
• Modular connectors for easy access control
and accessory installation
• Digital limits setup and control
• LED indicators display gate and operator
status for easy troubleshooting
• Mechanical Gear Release