Need help?Do you have a question about the Viking Access Systems i-8 and is the answer not in the manual?
General| Brand | Viking Access Systems |
|---|---|
| Model | i-8 |
| Category | Gate Opener |
| Language | English |
Overview of the Viking i-8 gate operator, its features, and classifications.
Detailed list and visual representation of all components for the gate operator.
Crucial safety notice emphasizing that installation must be performed by qualified individuals only.
Critical safety guidelines and maintenance procedures for operating the gate operator.
Key instructions, warnings, and class classifications for safe and compliant gate operator installation.
Procedures for installing photo beams and edge sensors to prevent entrapment.
Guidelines for installing audible alarms and warning placards for safety compliance.
Technical specifications, maximum capacities, and operational limits for the gate operator.
Recommendations for positioning control buttons for safe and accessible operation.
Steps for planning the gate operator placement and preparing the installation site.
Steps for mounting the gearmotor, drive arms, and gate attachments.
Procedures for setting gate travel limits and configuring opening/closing behavior.
Instructions for installing the control box and making electrical connections for power.
Diagrams and dimensions for installing vehicular loop detectors for optimal performance.
Recommendations for loop wire installation, including wire type, twist rate, and number of turns.
Connects external devices for opening the gate, like keypads or push buttons.
Wiring for secondary entrapment protection devices like edge sensors and photo beams.
How to connect and configure a radio receiver for wireless gate control.
Setting the timer for how long the gate remains open before automatically closing.
Overview of features, specifications, and components of the Viking electromagnetic lock.
Procedures for wiring magnetic locks and solenoid connections for gate operation.
Wiring a guard station with switches for manual gate control (open, stop, close).
Explanation of the intelligent obstruction sensor and its role in entrapment protection.
How to configure the overlap delay for master/slave gate operation for synchronized movement.
How the Auto-Open feature operates during power outages and its benefits.
Step-by-step guide for installing and configuring the Viking Blue wireless communication module.
Diagram showing how to connect solar panels to the controller and the gate operator.
Guidelines for selecting solar panels, batteries, and understanding system operation based on cycles.
Solutions for common issues like gate not running, sensor faults, and audio alarms.
Troubleshooting power failures, automatic closing problems, wiring faults, and LED indicators.
Statement on Viking's dedication to developing high-quality, innovative gate operator technology.
Summary of key features, UL compliance, operational capabilities, and technical specifications.
To Next Page
