Why Viking Dishwasher breaks dishes?
If kitchen utensils are broken in your Viking Dishwasher: * Load the dishes as described in the user manual. * Do not overload the baskets beyond their capacity.
Why Viking Ranges oven does not operate in self-clean?
If your Viking Ranges oven does not operate in self-clean, it could be because the door is not shut tight enough for the automatic door latch to lock.
What to do if lights do not work in Viking Refrigerator?
If the lights in your Viking Refrigerator aren't working, check if a household fuse has blown or a circuit breaker has tripped. If not, the LED light may be blown, and you should contact an authorized service agency.
What to do if my Viking Ranges igniters will not work?
If the igniters on your Viking Ranges are not working, it could be due to a tripped circuit or a blown fuse. Check your fuse.
What to do if Viking Ranges door will not open?
If the door of your Viking Ranges will not open, it might be because the oven is still in self-clean mode. If the oven is hot, the door latch will release once a safe temperature is reached.
Why my Viking Dishwasher does not start?
If your Viking Dishwasher doesn't start, there are several possible causes: * The power cable might be unplugged, so check if it's properly connected. * A circuit breaker could be blown; inspect the circuit breaker in your house. * The water supply might be off; ensure the water inlet tap is open. * The dishwasher door might not be closed properly; make sure the door is fully closed. * The On/Off button might not have been pressed; verify that you've turned the machine on using the On/Off button.
What to do if the igniters on my Viking Ranges aren't working?
If the igniters on your Viking Ranges aren't working, there could be a few reasons. First, check if a circuit is tripped and reset the circuit breaker. Also, a fuse might be blown, so replace it if necessary. Finally, ensure the range is properly connected to a power source; check the electrical connection.
What to do if igniters sparking but no flame ignition on Viking Ranges?
If the igniters on your Viking Ranges are sparking but you're not getting any flame ignition, first, check that the gas supply valve is in the ON position. If it is, ensure that your gas supply is continuous and hasn't been interrupted.
What to do if Viking Ranges igniters spark but there is no flame?
If the igniters on your Viking Ranges are sparking but not igniting the flame, the gas supply valve may be in the “OFF” position, or the gas supply may be interrupted. Ensure the gas supply is properly connected and turned on.
Why won't the igniters work on my Viking Ranges?
If the igniters on your Viking Ranges aren't working, a tripped circuit or a blown fuse could be the cause. Also, check to ensure that the range is connected to a power source.
To Next Page
General
