27
11
12
13
14
Pull supply tubing forward under unit.
Note: DO NOT use plastic water lines.
Flush water line by running two quarts of water
into a bucket. Turn water o .
Connect supply tube to water valve using
a 1/2” wrench. Note: DO NOT overtighten.
Turn on water supply and check for leaks.
10b
Place unit within 3” (7.6 cm) of being ush with cabinets.
Note: To avoid cabinet damage, place cardboard
between cabinets and unit. When moving unit,
DO NOT crimp, kink or crush water supply line.
Carefully move unit until semi ush with cabinet (depending
on unit).
3”
3”
10a
Installation
To Next Page
Loading...
