Vimar Eikon Instruction Handbook

ENGLISH - 51
6.7.9
Remove the smart card.
The LED turns green, waiting for other
SLAVE smart cards to cancel.
To cancel additional smart cards, repeat
the procedure from step 6.7.7.
6.7.10
To exit the procedure, press the front
button.
The LED switches off.
If no smart cards are inserted for about
15 seconds, the procedure automatically
terminates.
Exiting is signalled by the LED switch-
ing off.
SLAVE
card
SLAVE
card
6.7.7
Insert the SLAVE smart card to be can-
celled.
The device waits for a smart card to can-
cel for about 15 seconds, after which it
exits the procedure.
Exiting is signalled by the LED switch-
ing off.
6.7.8
When the LED turns off, the SLAVE smart
card has been cancelled.

Vimar Eikon Specifications

General

Series	Eikon
Brand	Vimar
Type	Switch
Mounting	Flush mounting
Voltage	230V
Current	10A