6 - ENGLISH
Functions in the operating mode without a configurator
• Smart cards managed locally, with smart card program-
ming procedure.
• Non-hierarchical system (without MASTER smart cards):
each smart card enabled for a particular access point can
be used to enable other cards for that same access point.
• Hierarchical system with two types of smart card:
MASTER (has access to all points, and can be used to
enable SLAVE smart cards) and SLAVE (can only access
the enabled points).
• Choice of monostable or bistable relay operation.
• Support for Vimar 16452.
• Command for associating a relay (procedure invoked
using a master card and pressing the front button).
• Activating the IrDA interface (function necessary to switch
the system to the operating mode with a configurator).
Key:
+, – : Connection to BUS
To Next Page
Loading...
