32 - ITALIANO
5.4.5
Remove the smart card.
The LED turns green, waiting for the
smart card to program as a duplicate.
5.4.6
Insert the smart card to be programmed
as a duplicate.
The device waits for a smart card to pro-
gram for about 15 seconds, after which it
exits the procedure. Exiting is signalled by
the LED switching off.
5.4.7
When the LED turns off, the duplicate
smart card has been programmed.
5.4.3
Wait for the LED to turn red (after about
15 seconds), then insert the programmed
smart card to be duplicated.
If the MASTER smart card is not inserted
within 15 seconds, the LED turns off and
the device exits the procedure.
Card
already
programmed
Card
already
programmed
If the LED blinks red it means the smart
card was not recognised.
Remove the incorrect smart card and
insert the correct one.
5.4.4
If the smart card is recognised, the LED
switches off.
To Next Page
Loading...
Need help?
General
