CM1 USER MANUAL
33
problem still exists, connect your camera with power, and then press “RESET”
key on the bottom to restore to factory settings.
4). Why are there vertical white lines in image?
CMOS sensor being exposed to strong light (such as direct exposure to sunlight
or halogen light) may cause this problem. CMOS sensor is behind the lens. It is
to measure the optical signal and converts it to a digital format, then the
computer will convert digital format to images to users. If the CMOS sensor has
been in high night for a long time remember not to move it to dark places for it
may damage the sensor.
5). Blur image. What to do?
When camera works in dark places, its image may get blur.
Or, your camera does not focus properly. Rotate the lens till you see a clear
image.
Web viewing on a computer may get a blur image. Because a computer has
much larger screen than a phone, and same resolution image will be amplified.
6). Image quality is poor, how to improve it?
Open www.vimtag.com
and login. Find image quality configuration to adjust the
parameters to improve image quality (e.g.: brightness, contrast, color saturation).
7). When I view on a web, there is no image. Why?
To Next Page
Loading...