BEFORE FIRST USE
8
Before using your coffee maker for the first time, please take a moment to perform the steps
below.
1. UNPACK
Open the box and remove the appliance with its various components, placing all parts on a
flat, level, and dry heat-resistant surface. Remove and/or discard any packaging material,
promotional labels, and tape from the unit.
2. CLEAN
Immerse the Water Reservoir, Espresso Cup Platform and Pod Disposal Basket, and Mug
Platform with Drip Tray Plate in warm, soapy water. Rinse and dry. Clean the outside of the
Unit Base with a clean, damp cloth. Avoid using abrasive cleaners on the Unit Base.
WARNING: Never submerge the Unit Base in water or any other liquid.
Plug in the unit. Insert the power cord into an electrical outlet, then press the Power Button
to power the unit on. After power on, press the power button and the power button light
flashes until the preheat is complete.
1.
Slide the Mug Platform into the bottom front of the Unit Base. Place the Drip Tray Plate on
top of the Mug Platform. This part helps to catch excess drips from the coffee spout to avoid
messes.
2.
Brew
Boost
ASSEMBLY
To Next Page
Loading...