2. Turn on HEXA. It will reset itself automatically. The head light on HEXA will
be steady purple for 5-10 seconds before it is ready to reset.
3. The head light on HEXA will be steady green when resetting. The process
may take about 20 seconds.
4. When finished reseting, the head light on HEXA will blink yellow. At this
point, please press HEXA’s power button and turn it off.
5. Unplug the Dupont wires while HEXA is off.
6. Turn on HEXA again and activate it by following the activation instructions
shown on Page 6.
Getting Started 29
To Next Page
