Back
8
Usage
The Vector 750 pan and tilt head is designed for use in broadcast and film studios to support and
balance a camera and ancillary equipment weighing up to 75 kg (165.3 lb), and must be mounted
on equipment designed to support a minimum payload of 95 kg (209 lbs.) The Vector 750 pan and
tilt head is intended for use by professional TV broadcast and film camera operators.
Further information
For further information or advice regarding this pan and tilt head, please contact Camera Dynam-
ics Limited, your local Vinten distributor (see back cover) or visit our website.
For details on maintenance and spare parts, please refer to the Vector 750 Pan and Tilt Head
Maintenance Manual and Illustrated Parts List (Publication Part No. V4034-4990) This is obtain-
able from Camera Dynamics Limited or your local Vinten distributor. For information on-line, visit
our website at
www.vinten.com
WARNING! 1. Do NOT attempt to use this product if you do not understand
how to operate it.
2. Do NOT use this product for any other purpose than that
specified in the Usage statement above.
3. Maintenance beyond that detailed in this Operators Guide
must be performed only by competent personnel in accordance
with the procedures specified in the Maintenance Manual.
To Next Page
Loading...
