Back
12
Wedge adaptor
The camera is attached to the head by means of a wedge adaptor (12), which is mounted on a
graduated sliding plate (11). The position of the slide plate is adjusted by a retractable knob (2)
and a clamp (14) is provided to hold the slide plate in position.
Four-hole mounting plate
The head is provided with a standard Vinten four-hole mounting plate (20), which includes a
`Quickfix' mounting and provision for use of a Mitchell adapter (19).
Carrying handle
A retractable carrying handle (3) is provided on the right-hand side of the head. The handle is
spring-loaded to the closed position.
To Next Page
Loading...
