VIOMI V3 Max - Voice Prompts; Troubleshooting; Cannot start the machine.; The machine suddenly stops working.

18
Voice Prompts Solution
1. Please remove and clean it, its
connections, its cover and the suction
inlet. Please try to restart the machine
aer cleaning.
2. If the error persists, please contact
our Service Department.
Main brush has problem.
1. Please clean the water tank, water
pump connections on the tank and
water pump connections on the
machine, the water outlet at the
machine boom, and check the
mop module. Please try to restart the
machine with all modules installed
back aer cleaning.
2. If the error persists, please contact
our Service Department.
There seems to be
something wrong with
the pump.
1. Please check the laser sensor for
foreign maer and try to restart the
machine aer cleaning.
2. If the error persists, please contact
our Service Department.
There seems to be
something wrong with
the laser distance sensor.
Voice Prompts Solution
The laser distance sensor is blocked,
please clear the blocking. Too
spacious environment and multi-re-
flection environment such as metal
mirrors also affect the normal
operation of a laser distance sensor.
Please relocate it to start.
Please make sure the
laser distance sensor is
not blocked.
1. Please open the baery compart-
ment, check whether the baery is
properly connected, and try to restart
the machine.
2. The baery temperature is too high
or too low. Please wait for the baery
temperature to be normal (0℃~40℃
/32°F~104°F) before use.
3. If the error persists, please contact
our Service Department.
There seems to be
something wrong with
the baery.
1. Please check whether any foreign
maer is stuck in a wheel and try to
restart the machine.
2. If the error persists, please contact
our Service Department.
Main wheel has problem.
1. Please check whether any foreign
maer is stuck in a side brush and try
to restart the machine.
2. If the error persists, please contact
our Service Department.
Side brush has
problem.
1. Please check whether any foreign
maer is stuck in the fan and try to
restart the machine.
2. Please clean the dust box and
filters and try to restart the machine.
3. If the error persists, please contact
our Service Department.
There seems to be
something wrong with
the fan.