8
Section 5: Wall Mounting
VESA and/or mounting accessories not included.
1. Open the package and take out the monitor with the foam still attached. Gently
place it on a desktop or table. If the monitor is attached to the stand, remove
the stand by pressing the button on the back of the monitor just below the stand
plate.
2. Remove the stand plate from the back of the monitor, and attach the four NO. 3
screws into the mounting holes at the back of the monitor.
NO. 3 Screws x4
Stand Plate
3. Follow the directions that came with your mounting kit (not included) to mount
the monitor on the wall or monitor stand.
Wall
Mounting Base
(Not included)
To Next Page
Loading...
