8
Section 5: Mount Installation
1. Open the package and take out the product with foam still attached. Gently place
it on a desktop or table. If the monitor is already attached to the stand, remove
the stand.
Button
2. Press the button to remove the adapter on back of monitor, then tighten the
included four NO. 2 screws onto the mounting holes on back of monitor.
NO. 2
Screws x 4
3. Remove the extra parts and the foam covering the monitor, then install the
monitor on the wall, mount, or xture as desired.
Mount
(not included)
To Next Page
Loading...
