Viotek NBV24CB User Manual

8
Section 5: Wall Mounting
VESA and/or mounting accessories not included.
1. Open the package, take out the monitor with the foam still attached, and gently
place it on a desktop or table. If the monitor is attached to the stand, remove the
stand by pressing the button on the back of the monitor just above the stand.
2. At the back of the monitor, attach the four NO. 2 screws onto the mounting holes
on back of monitor.
26mm NO. 2 Screws x 2
20mm NO. 2 Screws x 2
3. Follow the directions that came with your mounting kit (not included) to mount
the monitor on the wall or monitor stand.
Wall
Mounting Base
(Not included)

Viotek NBV24CB Specifications

General

Screen Type	led
Wall Mount	75mm x 75mm
OS Compatibility	mac, windows
Screen Size	24 inches
Panel Type	va
Aspect Ratio	16:9
Resolution	1920 x 1080
Native Resolution	1920 x 1080
Refresh Rate	75hz
Horizontal Viewing Angle	178 degrees
Vertical Viewing Angle	178 degrees
Response Time	8 milliseconds
Brightness	250 candela per square meter
Contrast Ratio	1, 000, 000:1
Synchronization	freesync (amd adaptive sync)
VGA Ports	1
Power Saving Mode	0.5 watts
Power Consumption	29 watts
Width with Stand	21.2 inches
Depth without Stand	8.2 inches
Height without Stand	16.3 inches
Net Weight without Stand	6.6 pounds