Viotek SUW49DA2 User Manual

9
Section 6: Wall Mounting
This monitor ONLY includes screws which may be used when attaching the monitor
to a mount. No mount or mounting accessory is included.
1. Open the package, take out the product with foam still attached, and gently place it on a
desktop or table. Remove the extra parts and the foam covering the monitor. If the monitor
was already attached to the stand, remove the stand.
2. Remove the original screws x 4 (
1
) from the opening in the back of the monitor. Follow
the directions received with your mount, stand, or accessory and install the monitor on the
wall or xture as desired. Remember to use the included NO. 2 screws when attaching
anything to the back of the monitor. Refer to the image (
2
) for correct screw placement.
1
Original Screws x 4
Use the 35mm
NO.2 Screws x 2
Use the 17mm
NO. 2 Screws x 2
2
- Use only the NO. 2 Screws (35 mm x 2 pcs, 17mm x 2 pcs) provided with this
type of installation.
- Do not discard the original screws as these may be needed for future use.
3. Follow the directions received with your mount, stand, or accessory and install the monitor
on the wall or xture as desired.
Mount
(Not included)

Viotek SUW49DA2 Specifications

General

Color	black
Screen Type	lcd
Tiltable	yes
OS Compatibility	windows, mac, linux
Screen Size	49 inches
Panel Type	not applicable
Aspect Ratio	32:9
Resolution	5120 x 1440
Native Resolution	5120 x 1440
Refresh Rate	120hz
Horizontal Viewing Angle	178 degrees
Vertical Viewing Angle	178 degrees
Response Time	4 milliseconds
Brightness	300 candela per square meter
Contrast Ratio	1, 000, 000:1
Synchronization	freesync (amd adaptive sync)
HDR	no
Built-In Speakers	yes
Display Port Inputs	2
Depth with Stand	9.46 inches
Height with Stand	18.35 inches
Width with Stand	46.4 inches
Net Weight without Stand	24.25 pounds